Design and Optimization of Stem Mustard Cutting Device Based on Response Surface Methodology (RSM)
文献类型： 外文期刊
作者： Song, Shumin 1 ; Zhang, Lei 1 ; Wu, Yu 1 ; Shao, Weixing 1 ; Liu, Wenshu 1 ; Li, Bin 2 ; Zeng, Zhiheng 2 ; Pang, Youlun 1 ;
作者机构： 1.Chongqing Acad Agr Sci, Chongqing 401329, Peoples R China
2.Chongqing Univ Arts & Sci, Sch Intelligent Mfg Engn, Chongqing 404100, Peoples R China
关键词： squash industry; stem mustard; reciprocating cutter device; optimal; field experiments; RSM; optimization
期刊名称：PROCESSES （ 影响因子：2.8； 五年影响因子：3.1 ）
ISSN：
年卷期： 2025 年 13 卷 3 期
页码：
收录情况： SCI
摘要： The high damage rate of mechanical cutting and low harvesting efficiency of stem mustard is a major constraint to the sustainable development of its industry. In this study, a reciprocating cutter device tailored for stem mustard was designed for stem mustard under special growing conditions in southwest China. A reciprocating cutter model was developed based on ANSYS/LS-DYNA. Parameters considered include cutting height (X1), angle of incision (X2), forward speed (X3) and single run displacement (X4). Cutting force (F) and cutting power (P) were identified as evaluation metrics. A multifactor quadratic regression model was developed for the orthogonal combinatorial testing procedure using the Box-Behnken design methodology. Cutting force and cutting power obtained by applied derivation of regression equations were 41.4 N and 36.756 W, respectively. Response surface methodology and analysis of variance (ANOVA) were used to determine the optimum operating parameters of the cutting tools used for machining, which were determined to be X1 = 1.45 mm, X2 = 12 degrees, X3 = 0.5 m/s and X4 = 93 mm. The maximum cutting success rate of 94% and the minimum damage rate of 6% on stemmed mustard under the optimum combination of cutting parameters were verified through several field trials. The results of this study provide valuable technical insights into the optimal design of harvesting equipment for stem and leaf mustard to improve the success rate and reduce the damage rate.
- 相关文献
作者其他论文 更多>>
-
Calibration of Parameters for Leaf-Stem-Cutting Model of Tuber Mustard (Brassica juncea L.) Based on Discrete Element Method
作者：Gu, Man;Shen, Haiyang;Luo, Weiwen;Ling, Jie;Wang, Bokai;Hu, Zhichao;Gu, Man;Gu, Fengwei;Song, Shumin;Pan, Liang
关键词：discrete element method (DEM); tuber mustard; parameter calibration; cutting mechanics
-
Calibration and testing of discrete element simulation parameters for spinach seeds
作者：Zheng, Gang;Qi, Bing;Zhang, Wenyi;Xia, Qian Qian;Wang, Yunxia;Song, Shumin;Wu, Yu
关键词：Spinach seeds; Discrete element method; Contact parameters; Calibration; Seed metering device
-
Engineering Discrete Element Method-Based Design and Optimization of the Key Components of a Spoon-Wheel Spinach Seed-Metering Device
作者：Zheng, Gang;Qi, Bing;Zhang, Wenyi;Wang, Yunxia;Ding, Youqiang;Shao, Weixing;Zhang, Lei
关键词：seed metering device; EDEM simulation; spoon-wheel type; Box-Behnken design experiment; seed spoons
-
Yield and Quality in Main and Ratoon Crops of Grain Sorghum Under Different Nitrogen Rates and Planting Densities
作者：Zhou, Yu;Huang, Juan;Li, Zebi;Wu, Yu;Zhang, Jijun;Zhang, Yaqin
关键词：grain sorghum; ratooning; yield; quality; nitrogen fertilizer; planting density
-
First report of Botrytis cinerea causing gray mold on Arachis hypogaea in Chongqing, China (Jul, 10.1007/s42161-022-01158-3, 2022)
作者：Yang, Ming;Zhang, Zhiliang;Wu, Yu;Wang, Qiuyue;Zhang, Xiaochun;Zhang, Xia
关键词：
-
First report of Botrytis cinerea causing gray mold on Arachis hypogaea in Chongqing, China
作者：Yang, Ming;Zhang, Zhiliang;Wu, Yu;Wang, Qiuyue;Zhang, Xiaochun;Zhang, Xia
关键词：
-
Path planning of autonomous agricultural machineries in complex rural road
作者：Cui, Jinbo;Zhang, Xianfeng;Feng, Wei;Li, Ping;Wu, Yu;Fan, Xinmiao
关键词：
